Heating-element socket welding with the manual welding device
Remove dirt and impurities at the pipe ends. (Note: for the processing of aquatherm blue pipe ot ti peeling)
Mark welding depth with the attached blue template and a pencil.
Take the aquatherm-socket out of the packing. Loose fittings must be cleaned.
Press the aquatherm-socket on the male welding tool and at the same time push the pipe end up to the marked welding depth in the female welding tool.
After the heating time pull off the welding socket and the pipe end from the welding tools.
Directly after the removal of the welding device push the socket on the pipe end.
Within the processing time press the welding socket on the pipe end up to the end of the welding depth.
Align and momentary fix the welding socket. Further processing is carried out after the specified cooling time.