aquatherm Orange System

Developed 40 years ago as one of the first surface heating systems, it formed the basis for the company aquatherm. As a part of the rebranding „colours of innovation“ the product group aquatherm surface heating has been renamed to “aquatherm orange system”. Accordingly, the color of the heating pipes has been adjusted in orange.

New buildings – surface heatingMore than three decades experience in the production and application of underfloor heating systems as well as the continuous development to achieve energy saving and efficient technology, make aquatherm one of the most experienced and globally successful manufacturers of underfloor heating. The performance of an underfloor heating system is mainly determined by the quality of the installed components:

insulation roll
aluminium foil
grid marked sheet
knob plate
element 25
heating pipe
PE-RT pipe
PB pipe
manifold technology
control technique

Campos de aplicación

Sistema de calefacción en la construcciónSistema de calefacción en la construcción
Calefacción y refrigeración por suelo radiante en instalaciones deportivasCalefacción y refrig. por suelo radiante
Calefacción por suelo radianteCalefacción por suelo radiante
Calefacción de paredCalefacción de pared
Refrigeración industrial por suelo radianteRefrigeración industrial por suelo radiante
Calefacción industrial por sueloCalefacción industrial por suelo

Ventajas del suelo radiante

  • Excelente resistencia a la fluencia de altas temperaturas
  • Superficie de la tubería interior lisa
  • Bajas pérdidas de calor por fricción
  • Excelente resistencia al envejecimiento
  • Resistencia a la corrosión
  • Excelente resistencia química
  • Alta flexibilidad
  • Buena resistencia al impacto
  • Ruido de bajo flujo en el tubo
  • Oxígeno-DIN 4726 por EVOH-capa
Old buildings – surface heating

With the development of the system element 25 aquatherm offers an all-purpose heating system for lowest construction thickness in the field of surface heating. It meets all requirements of old and new buildings – especially for refurbishments.

Whether in dry or wet construction, all requirements of an underfloor heating system can be complied with. The extruded system plate with pre-fabricated pipe channels is suitable for every floor plan and each room layout.


Lowest construction depth (e.g. 50mm with dry floor, 55mm with screed, 60mm with floating floor) due to low plate thickness. The aquatherm system element 25 is the ideal solution for all situations of laying.

Interruptions in the progress of construction work is avoided.